数控车床粗车肿么编程比较快?(附上图纸)不用精车.

加工左边200处外圆1号刀：外圆开粗车刀2号刀：内孔开粗车刀G99M3 S1500T0101M8G0X345.Z0.1G1X102F0.2W0.5G0X343.G71U2R0.5G71P1Q2U0.1W0.05F0.2N1GOX198.8G1Z0.1F0.08X200.Z-0.5Z-30.X338Z-80.Z-82.N2U0.5G0X202.Z0.G1X102.F0.06W0.5GOX345.G70P1Q2G0Z100.T0102G0X103.9Z1G1Z-100.3F0.2U-0.5G0Z1.G0X105.G1Z0.F0.1X104.Z-0.5G1Z-100.3U-0.5G0Z100.M9M5M30调头 加工右侧1号刀：外圆粗车刀2号刀：内孔粗车刀3号刀：成型刀G99M3S1500T0101M8G0X345.Z1.G72W2.R0.5G72P1Q2U0.1W0.1F0.2N1G0Z-18.8G1X338.F0.08X223.7Z0.N2X104.G70P1Q2G0Z100.T0102G0X102Z1.G71U1.5R0.5G71P1Q2U-0.1W0.08F0.2N3G0X223.5G1Z0.F0.07X210.5Z-11.2X105.X104.W0.5N4U-0.5G70P3Q4G0Z100.T0103（考率效率问题用成型刀加工）G0X210.6Z1.G1Z-14.7G0Z1.X223.7G1Z0.X210.6Z-14.8X200Z-3.6G0Z100.M9M5M30 加工过程由于加工材料的不同可能尖角可能会产生毛刺。包括转速，可在在生产中调试。如果精度高的工件调头加工应用百分表校正，或多加几把精车刀即可。你说用G1G0编程太烦琐，这张图是用了个G71跟G72编程。如果要求不高的话以上这的程序应该能达到楼主想要的结果。如果行的话就给分吧。